D DAMP K
Ecological protector against damp for marble, granite and agglomerates. Protects the surface from dirt and makes cleaning easier. Stops uprising humidity avoiding stains and marks caused by cement or adhesives used for the installation.
- classification: Water based
- category: Water repellent Oil repellent
- Yield: 1 litre for 18-20 sqm
Anti damp protector
Ecological protector against damp for marble, granite, and agglomerates. It protects the surface from dirt and makes cleaning easier. Stops uprising humidity avoiding stains and marks caused by cement or adhesives used for the installation. On certain materials a light color enhancing may be visible.
1 litre for approx. 18-20 m2 depending on the finish of the surface and on its absorption
- - Blocks saltpeter formation
- - Avoids stains due to humidity
- - Water repellent
- - Anti-stain
- - Nanotechnology product
- - Protects even if the surface is soaked in water
- - Protects even if applied only on top
- - Does not create any kind of problems with adhesives
- - Solvent-free
SHAKE BEFORE USING
PRODUCT TO BE PREPARED
Pour D DAMP K B into D DAMP K A. Shake well and use the obtained solution within 12 hours.
Before installation: Apply D DAMP K through immersion or directly onto a clean and dry surface. Apply a copious coat of D DAMP using a roller, spray, or a cloth with circular movements. Spread out evenly with a microfiber cloth. Apply the product on the top, on the back and on the edges of the tiles. Wait min. 24/48 hours before installation depending on room temperature.
Only use adhesives for installation. Do not use cement.
If some residue appears on top it can be easily removed with a cloth within 24/48 hours.
Installed surfaces: Apply the product on a clean and as dry as possible surface. Apply a copious coat of D DAMP K using a roller, spray, or a cloth with circular movements. Spread out evenly with a microfiber cloth. The product dries in 4/6 hours depending on room temperature. If some residue appears on top it can be easily removed with a cloth within 24/48 hours. Wait at least 48/72 hours before carrying out staining tests, so to allow the product to dry even in the porosity of the surface. It does not protect marble against acid substances that can cause slight corrosion.
For the ordinary maintenance of the treated surface we recommend the regular use of MGP 24 detergent.
Before using the product, read the toxicological data sheet (MSDS) and the label detailing all risks and the personal protective equipment to be used for correct use. The data of this technical data sheet is based on reliable information. Despite this, the manufacturer can’t know in advance the condition of the materials to be processed and the way of use of the product. Therefore, he disclaims any and all responsibility for damage arising from the inadequacy of the product for special applications.
Before treating or cleaning surfaces, carry out a test on an invisible point to prevent possible damages, since our responsibility is limited to the warranty of the purchased product and therefore we disclaim any responsibility for damages resulting from negligence or wrong use.
Keep out of reach of children.
If the product goes into eyes, rinse eyes thoroughly with water.
Packaging and Storage:
Keep the original, sealed container in a covered, ventilated, dry environment, and keep away from heat or low temperatures. After the use keep the package well closed, so the product has a shelf life of approx. 36 months.